Sawmill • Kiln — Syracuse · Central New York

Valentine Forest Products Log to dry lumber, one yard.

We saw local logs on a Wood-Mizer and dry them on site in an iDRY AIR kiln — up to 4,000 board feet a load. Slabs, lumber, beams and custom sawing. Drag the day slider and watch a load go from green to dry.

iDRY AIR · 20-ft side-load chamberDrag to look around
Moisture content—%
Chamber temp—°F
Fan direction—
Stage—

Illustrative schedule for a typical load. Real loads run on the kiln’s own drying profiles; cycle lengths are iDRY’s published typical figures.

What we saw

Slabs, boards, beams.

Sawn on our Wood-Mizer and dried in our iDRY AIR. These are the woods that come through the yard — call for what’s on hand today.

  • Black walnut

    live-edge slabs · boards

  • Box elder

    live-edge slabs

  • Oak

    boards

  • Pine / hemlock

    timbers & beams

Availability

What’s on the yard changes with every log we open, so we don’t list pieces here. Call and tell us what you’re after — we’ll say what’s dry now, what’s in the kiln, and what we can saw for you.

(315) 412-4007

Log to lumber

It all happens in one yard.

  • Logs in the yard, kiln and loader behind.

    Logs in the yard, kiln and loader behind.

  • A butt log on the Wood-Mizer, under the timber-frame shed.

    A butt log on the Wood-Mizer, under the timber-frame shed.

  • Stacked and banded under cover.

    Stacked and banded under cover.

  • A load heading out.

    A load heading out.

The kiln

Heat, moving air, and a touchscreen that watches both.

Green lumber moves, checks and carries bugs. The iDRY AIR bolts onto an insulated 20-foot shipping container and pushes heated air through the stickered pack with a 2-horsepower fan. The fan reverses, so both faces of the load dry at the same rate instead of one side racing ahead.

At the end of the cycle the chamber climbs toward 165°F. That is hot enough to heat-treat the load, so what leaves the yard is dry and sterile.

Got your own boards? We kiln-dry for other people too. Call and ask when the next load goes in.

iDRY AIR Equipment plate

Capacity
up to 4,000 BF / load
Chamber
20-ft side-load container
Heat
6 kW · max 165°F
Fan
2 HP · variable speed · reversible
Control
PLC + touchscreen
Heat treat
USDA heat-treat ready
4/4 hardwood
≈ 3 weeks
4/4 pine
≈ 8 days
A full kiln load on stickers.
A full kiln load on stickers.
Insulated side doors swing clear for the forks.
Insulated side doors swing clear for the forks.

Kiln schedule

The kiln runs on a schedule. Get your lumber on it.

Each load fires on a set date and fills up in board feet. See how much of the next one is spoken for, then call to claim your space.

Next firing

Hardwood load

December 1

20 FT · OVERHEADiDRY AIR1,520 BF openDOORS

Full

62%

Board feet open

1,520

Fires in

–days

Call to reserve a spot
Softwood loadDec 1520% full
Hardwood loadJan 50% full

Bring it air-dried to about 20%. Pine can come green. Nothing over 18 feet.

What to bring, and when

When should I bring my lumber?
When it’s air-dried to about 20% moisture. At that point it goes straight into the next load. Green lumber has to sit for months first, and we don’t have the dry storage to hold it for you.
Can you dry green lumber?
For some species, yes, but it takes longer and risks cracking and warping. Lumber that comes in at 20% dries clean and predictably. Pine is the exception: bring it green.
How long can the boards be?
Up to 18 feet.
How much fits in a load?
Up to 4,000 board feet, but the real limit depends on thickness and species. The board shows how much of the next load is already spoken for.
Can different woods dry together?
Yes, but the whole load runs at the pace of the slowest wood. 500 board feet of white oak in a pine load means everything dries at white-oak speed. So we run hardwood loads and softwood loads separately.
Why keep pine separate?
We run pine hot, up to about 160°F. That pulls the moisture fast and sets the pitch, so the boards go through a planer without gumming it up. White oak never gets that hot. If you bring pine for a hardwood load, we’ll slot it into the next softwood load.
How do I reserve space?
Call (315) 412-4007 with the species, thickness, rough board feet, longest length and how dry it is. We’ll tell you which load it belongs in.
What does it cost?
Board feet times the daily rate times days in the kiln. The calculator does the math.

More on kiln drying · All questions

Work it out

How much wood have you got, and what will it cost to dry?

Measure a board, get its board feet, then see what a run through the kiln comes to.

Board foot calculator

length × width × thickness ÷ 144 · in inches
Board feet
8 BF

96 in × 12 in × 1 in ÷ 144 = 8 board feet. For live-edge slabs, measure the width at the narrow end.

Lumber drying calculator

board feet × $0.10 × days
Rate
$0.10 / BF / day
Per day
$0.80
Drying cost
$6.40

8 BF × $0.10 = $0.80 a day × 8 days. Actual days depend on species, thickness and how wet the wood starts, so treat this as an estimate.

Ask about kiln space

Services

Bring a log. Or just bring a truck.

Custom sawing

Your logs, sawn the way you want them on the Wood-Mizer — slabs, boards or timbers.

More on custom sawing →

Kiln drying

Dried and heat-treated in the iDRY AIR. Ask about space in the next load.

More on kiln drying →

Slabs & lumber

Walnut, box elder, oak, ash and more, sawn here and sold dry.

More on slabs & lumber →

Beams & mantels

Pine and hemlock timbers, mantels and hearth pieces cut to size.

More on beams & mantels →

What customers say

  • “Two walnut slabs off one log, book-matched, and it seats eight. It’s the first thing anyone asks about when they walk in.”

    Example customerWalnut dining table
  • “We paneled the whole camp in the pine. Every board came out of the kiln flat and took the finish like it had always been there.”

    Example customerTongue-and-groove pine
  • “Tongue-and-groove over the bed, milled and dried in the same yard. A year on and not one joint has opened up.”

    Example customerTongue-and-groove pine
  • “The ski wall. All one kiln load, so the color matches board to board, and it went up tight and stayed tight.”

    Example customerTongue-and-groove pine
  • “Brought over a walnut log that had been down two years. Got back slabs flat enough to build off the same week.”

    Example customerWalnut slabs
  • “The mantel came out of the kiln at 7% and it hasn’t moved on the wall since. Exactly what we asked for.”

    Example customerAsh mantel
  • “Air-dried my pine to 20%, dropped it off, picked it up eight days later planed and ready.”

    Example customerKiln drying
  • “First time I’ve had someone saw my own logs the way I actually wanted them, not the way the mill wanted.”

    Example customerCustom sawing
  • “The flame box elder was the show piece of the whole build. Nobody else around here had it.”

    Example customerBox elder slabs
1 / 9

Who we are

A sawmill and a kiln, in one yard.

Valentine Forest Products is a sawmill and a kiln in Central New York. We saw the logs, load the kiln and answer the phone. If you need something cut or dried, call and talk to us directly.

(315) 412-4007

Get a quote

Tell us what you’re building.

Species, rough sizes and how dry it needs to be is enough to start. Or call.

(315) 412-4007